Teradek - Bolt 1000 3G-SDI Video Transceiver Set




The Bolt 1000 Transceiver Set comes with one Bolt 1000 Transmitter and one Bolt 1000 Receiver. The Transmitter takes an HDMI input only. The Receiver takes an HDMI input only.

With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable (1 Transmitter can multicast up to 4 Receivers), manual frequency selection and USB 3.0 GRAB Engine are all included on these new models.

Bolt transmits visually lossless 4:2:2 video over the unlicensed 5GHz band at less than 1 millisecond of delay. Bolt’s new firmware ensures your system reaches its full potential right out of the box. We’ve also improved reconnect times so your wireless link is restored instantly when you come back into range.



  • Transmit visually lossless video up to 1000ft with no delay.
  • Use more than twice as many Bolts in one location or avoid interference like never before.
  • Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels.
  • 20% Smaller Chassis
  • Easily identify which Bolt TX and RX work together with removable colored top plates.
  • Reconnect times during a dropped link are now instantaneous once you move back into range.




Video Inputs & Outputs

  • Input: 1 x SD/HD/3G-SDI (75 Ohm BNC)
  • Output: 1 x HD/SD/3G-SDI Loop-out (75 Ohm BNC)


Sdi Ancillary Data Support

  • Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to:
  • https://support.teradek.com/hc/en-us/articles/217446087


Color Sampling

  • SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)


Delay Tx To Rx

  • <0.001sec (when no video format conversion is enabled)


Supported Resolutions

  • 1080p 23.98/24/25/29.97/30/50/59.94/60
  • 1080psf23.98/24/25/29.97/30
  • 1080i50/59.94/60
  • 720p50/59.94/60
  • 480p59.94/576p50 (via HDMI ports only)
  • 480i(NTSC)/576i(PAL)


Video Compression

  • Visually Lossless


Test Pattern Generator Support

  • Custom output formatted test pattern over HDMI and SDI


Color Correction

  • CDL/1024 1D LUT (supports 10-bit color)
  • 33x33x33 3D LUT (supports 10-bit color)



  • 48kHz 24-bit PCM Compression
  • Embedded Audio Input



  • 0.95" x 2.6" x 4.47" (24mm x 66mm x 101.5mm)



  • 8oz (226g)


  • Milled Aluminum(Chassis) and regulation-compliant PCB
  • Plastic Cap



  • Non-DFS Frequencies:
  • US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
  • EU & JP: 5.19 ~ 5.23 GHz
  • DFS Frequencies:
  • US: 5.27 ~ 5.55 GHz and 5.67 GHz
  • EU & JP: 5.27 ~ 5.67 GHz


RF Channel Selection

  • Auto and Configurable Channel selection



  • AES-128


RF Power

  • 17 dbm EIRP (with one 2 dbi TX antenna)



  • Up to 1000 ft line of sight


Unicast Multicast

  • Unicast/Multicast


Noise Rejection

  • Can coexist with WiFi and 5GHz cordless phones


Power Input

  • 2-Pin Connector 7-28 VDC


Nominal Power Consumption

  • 8.5 Watts (Measured at 1080p60)


Operating Temperature

  • 0 ~ 50 deg-C



  • Multiple mounting options with 4-40 holes
  • Multiple mounting options with 1/4" holes



  • On/Of/Reset switch
  • Feature-rich Bolt Manager Application for OSX & Windows
  • Upgrade via Mini-USB port


  • (1) Bolt 1000 3G-SDI Video Transceiver Set

Related Products