RED - DSMC2 Base Expander

DESCRIPTION:

The DSMC2™ Base Expander is an ideal connector module for the general user’s Input/Output (I/O) needs. Manufactured from lightweight and durable magnesium, this low-profile module mounts directly to your DSMC2 BRAIN® and offers interface connections for power (DC IN), HDMI, 3G-SDI (HD-SDI), CTRL and SYNC ports (for Timecode and Genlock), as well as a 3.5mm microphone input and a 3.5mm line-level headphone out.

The DSMC2 Base Expander also offers rear-mounting support for the camera system-compatible battery and power modules, such as the DSMC2 REDVOLT XL Module. The low profile DSMC2 Base Expander offers a variety of connectors and is ideal for run-and-gun and independent shooters.

NOTE: Only one (1) expander module can be used at a time.

FEATURES:

Low-profile
Mounts directly to your DSMC2 BRAIN®
Rear-mounting support for the camera system-compatible battery and power modules

SPECIFICATIONS:

Dimensions:

Height: 4.57 in. (116 mm)
Width: 4.76 in. (121 mm)
Depth: 1.50 in. (38 mm)

Weight:

0.45 lbs (203 g)

Material:

Magnesium

BRAIN Mounting:

4x M4 captive mounting screws

BRAIN Connections:

Power delivery via DSMC2 Rear pogo connector (13-Pin)
Communication via DSMC2 Rear I/O connector (4×40 Pin)

Connectors:

DC IN (6-Pin 1B LEMO socket)
3G-SDI output (75 Ω BNC), 60 Hz max frame rate
HDMI 1.2 output (Type A socket), 60 Hz max frame rate
SYNC (Genlock IN / Timecode IN / Sync IN) (4-Pin 00B LEMO socket)
CTRL (Tally OUT / RS-232 Rx and Tx) (4-Pin 00B LEMO socket)
Stereo Analog Microphone input (3.5mm jack)
Stereo Headphone output (3.5mm jack)

Battery Module Connections:

Power delivery via DSMC2 Rear pogo connector (13-Pin)

Audio:

24-bit, 48 KHz, uncompressed, unbalanced mic level

Operating Temperature:

0°C to 40°C (32°F to 104°F)

Storage Temperature:

–20°C to 50°C (–4°F to 122°F)

Operating Humidity:

0% to 85%, non-condensing

Storage Humidity:

0% to 85%, non-condensing

Firmware Requirement:

Compatible with all DSMC2 firmware versions

INCLUDED:

(1) DSMC2 Base Expander