RED - DSMC2 Jetpack Expander

 

DESCRIPTION:

 

The DSMC2™ Jetpack-SDI Expander is designed for aerial, gimbal, handheld, and other lightweight/remote applications that require 3G-SDI output. Featuring connections for power (DC IN), SDI (3G-SDI), Gigabit Ethernet (GIG-E), AUX power, SYNC, and CTRL, the DSMC2 Jetpack-SDI Expander provides a low-profile expander solution. The 3G-SDI connection provides support for providing a signal to a remote monitoring solution, while the Gigabit Ethernet connection offers increased bandwidth for streaming high-quality footage.The DSMC2 Jetpack-SDI Expander is ideal for housings and low-profile configurations that require 3G-SDI outputs or computer tethering.

The DSMC2 Jetpack-SDI Expander also features a selector switch that enables the DSMC2 BRAIN® to automatically boot when power is provided via the DC IN connector on the expander. This feature allows you to use a connected DC input supply to turn the BRAIN on and off when the camera is mounted in remote or difficult to maneuver locations.

The DSMC2 Jetpack Expander is also available, featuring an HDMI output and USB support for many aerial configurations.

NOTE: Only one (1) expander module can be used at a time.

 

FEATURES: 

 
  • Designed for aerial, gimbal, handheld, and other lightweight/remote applications
  • Connections for power
  • Gigabit Ethernet connection offers increased bandwidth for streaming high-quality footage
  • Ideal for housings and low-profile configurations that require 3G-SDI outputs or computer tethering
  • DSMC2 Jetpack Expander is also available, featuring an HDMI output and USB support for many aerial configurations
 

SPECIFICATIONS:

 

Dimensions: 

  • Height: 4.57 in. (116 mm)
  • Width: 3.54 in. (90 mm)
  • Depth: 1.46 in. (37 mm)

 

Weight: 

  • 0.50 lbs (226.8 g)

 

Material: 

  • Magnesium

 

BRAIN Connections: 

  • Power delivery via DSMC2 Rear pogo connector (13-Pin)
  • Communication via DSMC2 Rear I/O connector (4×40 Pin)

 

Connectors: 

  • DC IN (6-Pin 1B LEMO socket)
  • HDMI 1.2 output (Type A socket), 60 Hz max frame rate
  • USB Power output (Type A socket), 1.0 A
  • SYNC (Genlock IN / Timecode IN / Sync IN) (4-Pin 00B LEMO socket)
  • CTRL (Tally OUT / RS-232 Rx and Tx) (4-Pin 00B LEMO socket)

 

Auto Boot on Power: 

  • 2-position slider switch

 

Operating Temperature: 

  • 0°C to 40°C (32°F to 104°F)

 

Storage Temperature: 

  • –20°C to 50°C (–4°F to 122°F)

 

Operating Humidity: 

  • 0% to 85%, non-condensing

 

Storage Humidity: 

  • 0% to 85%, non-condensing

 

Firmware Requirement: 

  • Compatible with all DSMC2 firmware versions

 

 
 

INCLUDED:

 
  • (1) DSMC2 Jetpack Expander
$950.00

Related Products