RED - DSMC2 Production Module (V-Lock)




Designed for professional shooting configurations, the DSMC2® Production Module (V-Lock) mounts directly to the BRAIN® and offers a comprehensive array of video, power, communication, and pro audio connections. Constructed from lightweight and durable aluminum alloy, this module incorporates an industry standard V-Lock mount to power your DSMC2 camera when using RED BRICK®, REDVOLT-V™, or other V-Lock batteries.


The Production Module includes three BNC video connectors for maximum monitoring flexibility on-set. Two connectors output a cloned 3G-SDI signal, and one connector serves as an independent monitoring output.


To support production demands for on-board monitors, wireless video transmitters, wireless lens control, and focus assist systems, the module includes multiple auxiliary power outputs.



  • Two front-facing 3-Pin Fischer R/S ports support Remote Start/Stop functionality, and provide 24V power out up to a combined 2.5 Amps.
  • A front-facing 2-Pin 0B AUX PWR port provides power out up to 3.0 Amps. 
  • A 2-Pin P-Tap connector on the top provides power out up to 3.0 Amps. 
  • A rear-facing USB 2.0 port with support for fast charging offers 5V at 1.5 Amps for powering small mobile devices.
  • Two standard 3-pin XLRs with preamplifiers are included for most professional audio needs.
  • ports for power in (DC IN), Genlock (BNC), Timecode (5-pin 0B), GIG-E, and CTRL.




  • Height: 4.57 in. (116.0 mm)
  • Width: 5.38 in. (136.7 mm)
  • Depth: 3.42 in. (86.8 mm) (connected to BRAIN)



  • Approx. 2.0 lbs (907.2 g)



  • Aluminum Alloy


Brain Mounting: 

  • 4x M4 captive mounting screws


Brain Connections: 

  • Power delivery via rear pogo connector (13-Pin)



  • P-Tap Aux Power output (2-Pin), 3.0A


Battery Compatibility: 

  • Power delivery via Rear pogo connector (13-Pin)
  • Communication via Rear I/O connector (4x40 Pin)



  • 2x 3G-SDI outputs (75 Ω BNC), 60 Hz max frame rate
  • Monitor output (75 Ω BNC), 60 Hz max frame rate
  • 2x 24V Aux Power / Remote Start/Stop Outputs (3-Pin Fischer), 2.5A Shared
  • Aux Power Output (2-Pin 0B), 3.0A
  • Aux Power Output (2-Pin P-Tap), 3.0A
  • DC IN (6-Pin 1B socket)
  • 2x Balanced Audio inputs (3-Pin, full size XLR female)
  • Stereo Headphone output (3.5 mm jack)
  • Timecode (5-pin 0B)
  • Genlock input (75 Ω BNC)
  • Gigabit Ethernet input/output (9-Pin 0B)
  • CTRL (Tally OUT / RS-232 Rx and Tx) (4-Pin 00)
  • USB Power output (Type A socket), 1.5A


Auto boot on power

  • 2-position slider switch


Audio 1

  • Dual 3-pin XLRs with preamplifiers, uncompressed, 24-bit, 48 KHz
  • Input Formats: Balanced Line, Balanced Mic (w/o Phantom Power),
  • Balanced Mic (w/ 48 V Phantom Power)


Operating Temperature: 

  • 0°C to 40°C (32°F to 104°F)


Storage Temperature: 

  • –20°C to 50°C (–4°F to 122°F)


Operating Humidity: 

  • 0% to 85%, non-condensing


Storage Humidity: 

  • 0% to 85%, non-condensing


Firmware Requirement: 

  • Compatible with all DSMC2 firmware v7.2 or later




  • (1) RED - DSMC2 Production Module (V-Lock)